personal advice

Saab 9-3 Sport Sedan Aero 1.9 TTiD (ID-EN-153)

Engine

Z19DTR

Exhaust

KCPerformance pre-cat delete pipe
New exhaust flex

Turbo/Compressor

KCPerformance stage 1 turbo upgrade

Software

Removed DPF
Removed EGR
KCPerformance stage 2 chiptune 230hp & 470Nm

Repair

KCPerformance hose set for intercooler

Remarks

KCPerformance develops tuningstages for all engines to get more power out of the standard engine with software and hardware modifications. One of the engines for which we have already developed quite extreme multistages is the 1.9 turbo diesel engine from GM. This engine can be found with a twin-turbo in the Saab 9-3, Lancia Delta and Cadilac BLS. Of course we can tune these engine also.

This beautiful Saab 9-3 Sport Sedan 1.9TTiD came to us after reading positive experiences from customers on the internet. He got his car tuned by us in a few steps. We replaced the pre-cat delete pipe and fitted a new exhaust flexpipe. The DPF itself was already removed by the customer so we adapted the software for DPF removal and closed the EGR in the ECU's software. The software was also upgraded to a stage 2 chip tune. Later we installed a KCPerformance stage 1 turbo upgrade because the original turbo was damaged. A new set of hoses for the intercooler was also installed.

The car is now much faster and sharper than before. The good thing is that the tuning can also be done in steps so you feel that your car is a little faster every step. This way we have tuning options for everybody.

KCPerformance project: Saab 9-3 Sport Sedan Aero 1.9 TTiD, photo 1

KCPerformance project: Saab 9-3 Sport Sedan Aero 1.9 TTiD, photo 2

Tuning stages, maintenance and options

DPFFrom € 369,-

DPF removal
(incl. removal of filter, regeneration disabled in the ECU) From € 369,-

Stage 1From € 499,-

450NM and 220BHP
ECU Software upgrade From € 499,-
Combined with DPF removal
(incl. removal of filter, regeneration disabled in the ECU) € 769,-

Stage 2From € 799,-

470NM and 230BHP
ECU Software upgrade From € 799,-
DPF removal
(incl. removal of filter, regeneration disabled in the ECU)

Stage 3From € 1.249,-

480NM and 240BHP
ECU Software upgrade From € 1.249,-
DPF removal
(incl. removal of filter, regeneration disabled in the ECU)
PreCat delete pipe
(replaces the first catalyst)
We recommend to upgrade the intercooler

Stage 4From € 3.399,-

500NM and 260BHP
ECU Software upgrade From € 3.399,-
DPF removal
(incl. removal of filter, regeneration disabled in the ECU)
EGR and regeneration disabled in the ECU
PreCat delete pipe
(replaces the first catalyst)
KCPerformance Hybrid turbo upgrade
"Stage 1 "
We recommend to also remove the swirl flaps
(in case of malfunction) and een grotere intercooler

Stage 5Price on request

550NM and 300BHP Price on request
Have us contact you!

OEM & Replacement parts
Swirl valve removal
(Dis-)assembly of the commonrail-pump, includes assembly € 699,-
Distributieriem-kit
Belt, tensioner and pulley, waterpump, coolant and assembly € 699,-
Distribution-kit 1
Belt, tensioner and pulley, swirl valves removal, waterpump, coolant and assembly € 1.149,-
Distribution-kit 2
Belt, tensioner and pulley, multi-belt and pulley, swirl valves removal, waterpump, coolant and assembly € 1.299,-

Options

Improvements
DPF removal (software only)
Without other software modification € 299,-
EGR removal (software only)
Without other software modification € 175,-
DPF removal
Combined with other software € 149,-
EGR removal (software only)
Combined with other software € 75,-

Upgrades

Replaces & Improves
Dynamo Pulley
Free run dynamo € 99,-
Precat delete pipe
"KCPerformance " € 199,-
Standard OEM turbo system
OEM turbo € 1.249,-
KCP upgrade hybrid turbo
Stage 1 € 1.849,-
Revised injectors
OEM € 999,-
Upgrade injectors
KCPerformance € 1.299,-
Air to Oil Cooler
Includes Goodridge hoses and backplate € 999,-
Water/Methanol injection
Stage 1: one nozzle and check valve € 499,-
Water/Methanol injection
Stage 2: two nozzles and solenoids € 999,-
Start motor € 299,-

Clutch

OEM & Upgrades
OEM clutch kit
Mounted including gear- and clutchoil € 849,-
OEM clutch kit
Clutch cylinder
Mounted including gear- and clutchoil € 1.049,-
OEM clutch kit
OEM dual mass flywheel
Clutch cylinder
Mounted including gear- and clutchoil € 1.549,-
KCPerformance Stage 1 or 2
Dual mass flywheel upgrade (engine dependent)
Mounted including slave cylinder, gear- and clutchoil € 1.999,-
KCPerformance SMF upgrade
(6/8 pad sinter plate or kevlar clutch)
Single mass flywheel
Modified clutch slave cylinder
(engine dependent) € 2.299,-